Battery 3 Volume Curves
Battery 3 Volume Curves
I've been tweaking my mandala template in Battery 3 to play more like the virtual brain. The standard velocity to volume ratio does not feel right to me. My solution has been to make a default compressor setting with increased volume on the low velocities and decreased volume on the high velocities. It haven't been able to get it quite right. Has anyone found the "sweet spot" for velocity/volume settings with Battery 3 in junction with the Mandala drums?
-
- Posts: 11
- Joined: Thu Feb 02, 2012 3:58 am
Re: Battery 3 Volume Curves
For me. . . if they are just straight samples. Aka. one sound sample.
I leave the velocity curve as linear. . . so dead straight from 0 to 1
but in modulations i plug velocity into volume, and drag the line till its at about 60 - 70 %
that usually works perfectly for me
Good luck
I leave the velocity curve as linear. . . so dead straight from 0 to 1
but in modulations i plug velocity into volume, and drag the line till its at about 60 - 70 %
that usually works perfectly for me
Good luck